Delfield 18699BSTMP Description Refrigerated Work Table, three-section, 99″ W, 27.46 cubic feet, (3) 27″ doors, stainless steel top and exterior, interior aluminum floor & back ABS sides, 4″ high backsplash, 6″ casters, side-mounted refrigeration system, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF
Refrigerated Work Table, three-section, 99″ W, 27.46 cubic feet, (3) 27″ doors, stainless steel top and exterior, interior aluminum floor & back ABS sides, 4″ high backsplash, 6″ casters, side-mounted refrigeration system, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF (more commercial worktop refrigerators and commercial refrigerators & freezers available)
Standard Features:
Electronic Control
Stainless steel top
4″ high backsplash
Standard on casters
Finished stainless steel ends
Compressor is located on right
Stainless steel exterior is standard
Environmentally friendly R290 refrigerant
Three year parts and labor warranty and an additional two year compressor parts warranty
High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
Options & Accessories
Lock
6″ legs
4″ casters
Tray racks
Laminate end
Laminate back
Refrigerated drawers
Laminate facing (full front)
Additional shelf (specify door size)
Cutting board (20″ wide x .5″ thick)
Celsius readout for electronic control
18” deep single tier stainless steel overshelf
Specifications
Exterior Top: Constructed of heavy duty stainless steel, with integral 2.12″ (5cm) high square nosing at the front. Top is insulated with high-density insulation. Exterior back and bottom are galvanized steel. Exterior ends are finished with stainless steel. Interior base has stainless steel back and bottom. Interior ends and door frames are thermoformed ABS plastic. Base is insulated with high-density foamedin-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Each interior door section has (1) removable epoxy-coated wire shelf. Door(s) have stainless steel exterior front, with a thermoformed ABS plastic interior liner. Black recessed handle(s) and a snap-in magnetic gasket which is readily replaceable. Base has a machine compartment, standard on right, with a condensing unit with condensate evaporator and an electrical junction box installed. Machine compartment has a removable louver for access to condensing unit. Blower coil(s) with expansion valve are located behind the door mullions. Refrigeration System: R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature. Interior cabinet is cooled with mullion style blower coils (coated) with expansion valves mounted between each door/drawer section for even air and temperature control. Electronic temperature controls and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Electronic control for base reads air temperature. On/Off switches for base are located behind the louvered panel. Options for Delfield 18699BSTMP Casters or legs 4″ casters in lieu of standard 6″ casters +$134.42 Set of (6) 6″ legs +$398.79 Lift gate option Lift gate option +$150.00 Center position drawer options Two Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 6″ deep pan capacity per drawer (pan not included) +$1,515.97 Three Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 4″ deep pan capacity per drawer (pan not included) +$1,926.54 Right position drawer options Two Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 6″ deep pan capacity per drawer (pan not included) +$1,515.97 Three Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 4″ deep pan capacity per drawer (pan not included) +$1,926.54 Left position drawer options Two Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 6″ deep pan capacity per drawer (pan not included) +$1,515.97 Three Tier Drawers in lieu of 27″ door, (2) 12″ x 20″ x 4″ deep pan capacity per drawer (pan not included) +$1,926.54 Tray rack (3977985) Tray rack (base support style for 18″x26″ trays); 2″ OC (contact factory for price) Cutting board Composite cutting board, 20″ wide x 1/2″ thick +$1,393.74 Poly cutting board, 20″ wide x 1/2″ thick +$732.20 Door lock Door/Drawer lock, original order only, not field installable, per section (not available on glass doors) +$184.37 Compressor location Compressor on right, standard Mechanical housing on left end in lieu of standard +$211.17 Finish options Laminated back, also requires stainless steel back +$728.54 Laminated facing, specify laminate +$728.54 Stainless steel back +$1,032.71 What is included Compressor warranty: 5 year compressor warranty, standard Parts & Labor warranty: 3 year parts & labor warranty, standard Refrigeration system: Self-contained refrigeration system, standard Voltages: 115v/60/1-ph, 4.8 amps, 8′ cord, NEMA 5-15P, standard
Reviews
There are no reviews yet.