Everest Refrigeration EGSDH2 Description Reach-In Dual Temperature Refrigerator/Freezer Combo, one-section, 29-1/4″W, 11.0 (R) & 11.0 (F) cu. ft. capacity, self-contained top mounted refrigeration, (1) glass hinged & (1) solid hinged self-closing half door (locking), (4) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting with on/off switch, pressure relief port, stainless steel interior, stainless steel sides, galvanized steel top, bottom & rear, (2) leg stabilizers, (4) 5″ swivel casters (2 locking), 1/2 HP, 115v/60/1-ph, 5.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation
Standard Features:
Refrigeration System
Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Large capacity, corrosion-resistant condenser and evaporator coils.
Pressure relief devices allow smooth access to cabinet interior when reopening doors.
Airflow guard ensures optimal circulation of cold air. R290 models include full-length air duct system.
Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
Time-initiated and temperature-terminated auto defrost heater for R404A and R290 freezers. Air defrost for R290 refrigerators.
High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
Top mounted, self-contained and fully detachable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant.
Cabinet Construction
Galvanized steel top, bottom and rear.
2.5″ thick high density polyurethane insulation.
Four 5″ swivel casters with locks on front set and two front leg stabilizers.
Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
Lighting
Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
Doors
Frame heaters prevent exterior moisture build up.
Pre-installed door locks keep your items safe from theft.
Self-closing with adjustable torsion system for a positive seal.
Snap-in magnetic door gaskets make cleaning and replacement an easy process.
Low emissivity double glass panes and matte finish aluminum door frames for glass doors.
Heavy duty, die-cast door handles for glass doors. High strength, recessed door handles for solid doors.
Heavy duty stainless steel interior / exterior with 2.5″ thick high density polyurethane insulation for solid doors.
Shelving
Height adjustable stainless steel clips.
Four epoxy coated, steel wire shelves per section.
Temperature Control
Multi-function digital controller with easy to read LED display.
R290 models include audible overheat protection alarm for compressor and condenser coil.
Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33°F to 54°F for refrigerators and -10°F to 54°F for freezers.
Options
Additional shelving.
3” swivel casters with locks.
3.5” – 6” height-adjustable and interchangeable legs.
Options for Everest Refrigeration EGSDH2 Notes NOTE: California HQ: (800) 444-6285 / TX Branch: (214) 792-9133 / NJ Branch: (201) 302-0217 NOTE: Specifications subject to change without notice NOTE: Parts and accessories are listed at standard NET pricing. No other multipliers apply NOTE: Product dimensions are for general purposes and not absolute value. Product capacity is calculated based on standard industry figures. Slight variations may exist. If dimensions and capacity are critical, please contact Everest Refrigeration NOTE: All contents are kept up as current as possible. For questions, concerns or to report possible inconsistencies, please contact Everest Refrigeration Shelving Shelf, epoxy coated, for bottom compartment, 23-1/4″ x 24″ (590mm x 610mm) (shelf clips included in price) +$57.25 Shelf, epoxy coated, for top compartment, 23-1/4″ x 24″ (590mm x 610mm) with right cut-out (shelf clips included in price) +$57.25 Mounting options 3.5″ – 6″ Overall Height Interchangeable Legs Set (4) 5″ Overall Height Casters Set of 4, (front 2 locking), standard Door hinging Top & bottom door hinged on left +$108.00 Top & bottom door hinged on right, standard What is included Warranty: Parts and labor: 3 years from ship dateElectrical Components Warranty: Electrical components: 5 years from ship dateCompressor Warranty: Compressor: 10 years from ship date
Reviews
There are no reviews yet.