Everest Refrigeration ESWQ3 Description Reach-In Dual Temperature Refrigerator/Freezer Combo, two-section, 59″W, 39.0 (R) & 13.0 (F) cu. ft. capacity, self-contained top mounted refrigeration, (1) solid hinged self-closing door (locking), (2) solid hinged self-closing half-doors (locking), (5) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, pressure relief port, stainless steel interior, stainless steel sides, galvanized steel top, bottom & rear, (4) 5″ swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/4 HP (R) & 1/2 HP (F), 115v/60/1-ph, 5.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation
Standard Features:
Refrigeration System
Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Large capacity, corrosion-resistant condenser and evaporator coils.
Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
Airflow guard ensures optimal circulation of cold air. R290 models include fulllength air duct system.
Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
Time-initiated and temperature-terminated auto defrost heater for R404A and R290 freezers. Air defrost for R290 refrigerators.
High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
Top mounted, self-contained and fully detachable condensing unit uses environmentally friendly R404A refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. Ask about alternative refrigerant.
Cabinet Construction
Galvanized steel top, bottom and rear.
Four 5″ swivel casters with locks on front set.
2.5″ thick high density polyurethane insulation.
Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
Lighting
Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
Doors
High strength, recessed door handles.
Heavy duty stainless steel interior / exterior.
2.5″ thick high density polyurethane insulation.
Frame heaters prevent exterior moisture build up.
Pre-installed door locks keep your items safe from theft.
Self-closing with adjustable torsion system for a positive seal.
Snap-in magnetic door gasket make cleaning and replacement an easy process.
Shelving
Height adjustable stainless steel clips.
Epoxy coated, steel wire shelves (see table for quantity).
Temperature Control
Multi-function digital controller with easy to read LED display.
R290 models include audible overheat protection alarm for compressor and condenser coil.
Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33°F to 54°F for refrigerators and -10°F to 54°F for freezers.
Options
Left hinged door.
Additional shelving.
3” swivel casters with locks.
3.5” – 6” height-adjustable and interchangeable legs.
Options for Everest Refrigeration ESWQ3 Notes NOTE: California HQ: (800) 444-6285 / TX Branch: (214) 792-9133 / NJ Branch: (201) 302-0217 NOTE: Specifications subject to change without notice NOTE: Parts and accessories are listed at standard NET pricing. No other multipliers apply NOTE: Product dimensions are for general purposes and not absolute value. Product capacity is calculated based on standard industry figures. Slight variations may exist. If dimensions and capacity are critical, please contact Everest Refrigeration NOTE: All contents are kept up as current as possible. For questions, concerns or to report possible inconsistencies, please contact Everest Refrigeration Shelving Shelf, epoxy coated, for bottom left compartment, 26″ x 24″ (660mm x 610mm) with airflow guard cut-out (shelf clips included in price) +$57.25 Shelf, epoxy coated, for bottom right compartment, 26″ x 24″ (660mm x 610mm) (shelf clips included in price) +$57.25 Shelf, epoxy coated, for top left compartment, 25″ x 24″ (635mm x 610mm) with airflow guard cut-out (shelf clips included in price) +$57.25 Shelf, epoxy coated, for top right compartment, 25″ x 24″ (635mm x 610mm) (shelf clips included in price) +$57.25 Mounting options 3″ Overall Height Casters Set of 4, (front 2 locking) 3.5″ – 6″ Overall Height Interchangeable Legs Set (4) 5″ Overall Height Casters Set of 4, (front 2 locking), standard What is included Warranty: Parts and labor: 3 years from ship dateElectrical Components Warranty: Electrical components: 5 years from ship dateCompressor Warranty: Compressor: 10 years from ship date
Reviews
There are no reviews yet.